Shenzhen JiDing Technology Co., Ltd
Best Energy Saving, Best Service!
Add to Cart
Mould Water Circulating Temperature Controller Patented Water Type Steam
Patented Single Function Water type Steam Mold Temperature Controller for Injection Moulding
Product Features
• Heating and cooling time is fast, Stable temperature
• Boot automatically
• LCD temperature display;
• Mold backwater function;
• Stainless steel pipes, reducing pipe and rust
• Fault alarming;
• use of imported components, long lifespan;
• Siemens Electronic Components .
JD machine’s advantages compared to similar Mold Temperature ContorIlers in industry
1. Independent R&D machine with owned intellectual property , patent#(2016211276698)(2016211589103)(2017200400855).
2. Hot steam are recyclable. Energy saving up to 35-40% compared with the direct-line equipment.
3. Machine is with multiple functions when configured with injection machine , it can realize mono color or dual color injection.
4. Machine is with two vapor outlet , these outlets may controlled front mold and rear mold randomly , injection engineer is more easy to control part warpage.
5. Machine is configured with soft water removal function . It settles cycle time increasing issue caused by pipes clogged inside mold.
6. Machine is with remote control module , it realizes remote alarming , control and monitor , this meet modern managemen requirement.
7. Machine had been certified by CE , it is only machine that is underwritten by international insurance company, it is safe and dependable. (NO.815262017000003000010)
Machines Spec.
| One Cycle Rapid Heating and Cooling Mold Temperature Controlling Machine Specification | |||||
| Single Function Mold Temperature Controller for Injection Machines technical parameters | |||||
| Item | Unit | JD-S-60 | JD-S-90 | JD-S-120 | JD-S-150 |
| Power source | V | 380V；50HZ | 380V；50HZ | 380V；50HZ | 380V；50HZ |
| Total power | KW | 65 | 95 | 125 | 150 |
| Flow rate of cooling pump | L/MIN | 67 | 133 | 133 | 133 |
| Flow rate of heating pump | L/MI N | 33 | 33 | 33 | 33 |
| inlet/outlet of cooling | MM | DN25 | DN32 | DN40 | DN40 |
| Soften water connector | MM | DN25 | DN25 | DN25 | DN25 |
| Diverter connector | 8 IN8 OUT | 12 IN12 OUT | 12 IN12 OUT | 16 IN16 OUT | |
| Dimensions | MM | 1580*600*1480 | 1580*750*1480 | 1580*750*1680 | 1580*750*1680 |
| Min. Space Requirement | MM | 2030*600*1480 | 2030*750*1480 | 2030*750*1680 | 2030*750*1680 |
| Gross Weight | KG | 550 | 550 | 630 | 630 |
| Applicable Tonnage of injection machine | T | 50-300 | 300-800 | 800-2000 | 1000-3000 |
| Machine Function | Single color high Gloss no-welding line Moulding process | ||||
| Optional Function | Remote failure monitoring and solving function | ||||